How to Install Pallet and Warehouse Racking

Once you have chosen to get pallet and warehouse racking in your warehouse, you then need to know how to install it. This does not need to be difficult process if you can find out how to do it properly. If you have the correct groundwork, installing a pallet rack will be simpler than you think. Below are a few tips to help you get started on installing your pallet and warehouse racking.

Things to Consider

When installing and choosing racking, you need to know what your local seismic demands are for your building as the racking will need to be installed based on these demands. You will also need to know which slab configurations you will need for your warehouse. You need to make sure you fit the right size and gauge options that will compatible to support the loads you are using the racking for.

Before Installation

To prepare for the installation process, you need to decide on the best racking configuration depending on the dimensions of your warehouse and what you are going to use the racking for. You can use more than one type of rack. Take a look at the different types of warehouse racking available. When you have chosen the rack or racks that you are using, you then need to plan a layout of the racks. You need to ensure this meets all legal requirements, and then you can send it off to be approved. Remember to get all building permits prior to starting your pallet and warehouse racking. Check everything is safe around the area to make sure it is suitable for installation. Once all the items are purchased for installation, you can begin staging. This is where you get everything together and check for anything damaged. Mark the flooring to ensure everything will fit and all the dimensions are still correct.

During Installation

When installing the first rack, ensure it is squared off according to your dimensions, in each direction. This is to make sure that your warehouse rack is installed and laid out correctly. You should constantly check that the rack installation always remains plumb, as if one dimension is wrong this can mess up the rest of the installation. Once each bay is correctly installed, you can then begin to anchor the footplates. You need to ensure that each bay is correctly plumbed before you go ahead and anchor them, if you yank a rack into a plumb after you have anchored, you could damage yourself or the rack. When an entire row has been built, you can the install and tighten the connectors accordingly.

When you have completed each of these steps, you can then thoroughly examine each segment to make sure it has been accurately installed. If you have any shelf accessories, these can be installed once rack and pallet installation is completed. Crossbars need to be spaced evenly, according to the weight distribution guide. If you wish to use decking, follow the manufacturer’s guidelines. Throughout each step, follow the manufacturer’s guidelines too, to ensure everything is installed safely and effectively. If you follow these guidelines as well as the manufacturer’s, you should have secure racking in your warehouse.

If you believe you cannot tackle pallet and warehouse racking installation on your own, there are professionals that can help and do it for you. It is cheaper to do it yourself, but if you have not done it before and you are unsure, it may be better to seek professional help to ensure that your warehouse and pallet racking are correctly installed.